My answer in “BOLD”
A sinusoidal voltage has a maximum value of 100V, and the value is 10V
at t=0. The period is T=1ms. Determine v(t) for the sinusoidal voltage
described.
A) 100 sin (3.14t + 0.1)v
B) 100 sin (6.28t + 6)v
C) 100 sin (3142t + 6)v
D) 100 sin (6283t + 0.1)v
Electrical and Computer Engineering Homework Solutions
#7187
Determine v(t) for the sinusoidal voltage described
Problem also in attached file.
A sinusoidal voltage has a maximum value of 100V, and the value is 10V at t=0. The period is T=1ms. Determine v(t) for the sinusoidal voltage described.
A) 100 sin (3.14t + 0.1)v
B) 100 sin (6.28t + 6)v
C) 100 sin (3142t + 6)v
D) 100 sin (6283t + 0.1)v
I arrived at "letter C"
What is this?
By OTA - Overall OTA Rating
Prasant Potuluri, PhD (IP) - 5/5
Purchase Cost Now
$2.19 CAD (was ~$3.99)
Included in Download
- Plain text response
Why you can trust BrainMass.com
- Your Information is Secure
- Best Online Academic Help Service
- Students find real academic Success
- Voltage Curves - See Attached
- {13.4} In the diode shown, the diodes are ideal except that each is modeled by a voltage source of 0.5V in series with a (diode) resistance of rd=20, when forward biased. A sinusoidal signal Vs with input impedance Rs=100 is connected to the diode circuit. Determine the maximum value of Vs such that Vo remains sinusoidal, with no distortion. Also, find the amplitude of the output signal Vo. - In the diode shown, the diodes are ideal except that each is modeled by a voltage source of 0.5V in series with a (diode) resistance of rd=20, when forward biased. A sinusoidal signal Vs with input im ...
- Graph source and load voltage of a circuit - Consider the following circuit. The sinusoidal source voltage is vs(t) = 20 * sin(2*pi*t). The diode is ideal. The correct sketch of the source voltage and the load voltage vL(t) as a function of t ...
- Microelectric Circuits 8 - Please check my work and if incorrect give me the correct answer Please refer to the problem stated in the attached file. (For the full-wave rectifier circuit shown below, the supply voltage is ...
- A sinusoidal voltage has a maximum value of 100V, and the value is 10V at t=0. The period is T=1ms. Determine the angular frequency, w, in rad/sec. - A sinusoidal voltage has a maximum value of 100V, and the value is 10V at t=0. The period is T=1ms. Determine the angular frequency, w, in rad/sec. a) 3.14 b) 6.28 c) 3142 d) 6283
