I am after someone to write the equations used to find Vab1 using volatage souce and Vab2 using the current source which will in turn give me ETH(Thevin Voltage) for the circuit (Vab1+Vab2) Vab1 is the volatage of the circuit using the voltage source and open circuit current source and applying the voltage divider rule. Vab2 ...continues
Thevinin Equivalent to work out max power
This is part of a maximum power problem that I have worked through. Could I please get someone to write down the equation for working out the ZTH(Thevinin equivalent load for this circuit) also could you find Vab1 is the volatage of the circuit using the voltage source and open circuit current source and applying the voltage ...continues
Superposition Theorem - Independent Sources
Using Superposition theorem for independent sources (ie using ohm's law and applying the current divider rule) I would like to check the equations used to find the voltage accross R4. RL is known so workings do not need to be shown. (See attached file for circuit diagram) This is a check for me as I am studying for an exam ...continues
See attached .Can yo show me how to find the value of R to obtain the drain current Id=.4mA.Also find the drain voltage VD.The NMOS transistor has a Vt=2V (See attached file for full problem description)
(See attached file for full problem description)
Can you show me how to solve question 7? see attached.
DC Circuits: Thevenin's voltage, equivalent resistance,
I need to find the Thevenin eq with respect to a and b. Can you show me how to solve it? (See attached file for full problem description)
See attached. How do I solve question 5? (See attached file for full problem description)
Please see attached. Numerical Answer is included in attachmnet I really need to see the step by step process to solve this problem. Draw the diagram of the loop used for each equation. Have fun... Thanks P.S. Scaned answers are acceptable, please write legibly.
Can someone help with the circuit in the attachment? I need to write the equations for the circuit, using loop or another method. From the equations, transform into Laplace equations and solve for the current through the 5 ohm resistor. (See attached file for full problem description)