Mechanical and Materials Engineering Homework Solutions
#15001
Need little help in the set ups of each formula.
A compacted body of iron powder is sintered into a 20mm-diameter, 45-mm-tall cylinder which, upon weighing, is found to have a mass of 98g. Calculate the apparent density, the percentage of theoretical density, and the void volume (porosity) in percent.
What is this?
By OTA - Overall OTA Rating
John Osborne, MBA (IP) - 5/5
Purchase Cost Now
$2.19 CAD (was ~$3.99)
Included in Download
- Plain text response
Why you can trust BrainMass.com
- Your Information is Secure
- Best Online Academic Help Service
- Students find real academic Success
- Gear pump volume and pressure difference problem - The diagram shows a gear pump. The maximum diameter of the gear wheels is 80 mm, the diameter of the roots of the teeth is 50 mm and the tooth width is 20mm. If the pump is driven at 500 rpm, please e ...
- Working with boiler suspension bolts. - An HRT boiler is 4766mm long and 3533mm in diameter. It has 66 steel tubes with a diameter of 9mm. The total dry weight of the boiler is 2.565 tonnes. 4 bolts are to suspend the boiler. If each bolt h ...
- Centrifugal pump - A centrifugal pump moves 10 l/s water from a pressure of 100kPA to a pressure of 550 kPA in one stage.... (See attached file for full problem description)
- Complex loading (bending and compression) - A steel chimney is 28m high, 1.4m external diameter, and 20mm thick. It is rigidly fixed at the base and is acted upon by a horizontal wind pressure of intensity 1.1KN/m2 on the projected area. The st ...
- Static Fluids Forces - See attachment - Tank is 38" Tall. Winch cable is on a 30 degree angle to the outside angled wall and Gate is 10" in diameter if print in attachment is unclear. Problem states: A tank of water has a ...
