Autocorrection Function of a Given Waveform

Related BrainMass Solutions

• Matching of time waveforms using inverse Laplace transforms

  Match each waveform A, B, C and D with its causing transfer function (1), (2), (3) and (4) given in TABLE A.

• even and odd signals

  a) And So x(t) is neither an even function nor odd function. Now we define , and Then Then f(t) is the even part of x(t), g(t) is the odd part of x(t). (b) So . Therefore, x(t) is an even function.

• Fouriers analysis 'inverse' function.

  back tothe original time domain values {b} Use the time domain values to plot a graph ofthe wave form and hence state if the waveform is from a TYPE A or a TYPE B load See attached Hi, Please see attached for the solution to the given problems

• Analysing harmonic content of ac voltage waveforms

  The 3rd and 5th harmonic appear to be about the same level at 0.02 seconds (20 ms) at 8V, the fundamental appears to be at a level of -116 V at 20 ms, so an estimate of the composite waveform level at 20 ms would be as given below.

• Frequency Divider

  Submit both your AHDL and waveform file. Please see attached files for the solution to the given problems. This posting contains the solution to the given problems.

• Contains basic function in MATLAB files.

  a) Sinusoidal waveform b) Exponential Waveform c) Damped Sinusoid d) Sinc function e) Step Function & Square Wave f) Triangle Wave g) Impulse Function Make sure there are enough points so that the upper plots look continuous, and fewer points

• Examining frequency to time domain signals

  (a) The Sin(x)/x type waveform (also known as Sinc(x) function) in the frequency domain is charactristic of a stream of pulses.

• Analysing spectrum anlyser output

  a. What sort of waveform do the individual lines in the frequency spectrum represent? b. What sort of waveform does the input signal have? c. Is the input signal periodic or non-periodic? d.

• DC power supply design

  If the time constant is very large compared to the period of the AC supply waveform (T), the capacitor voltage decrease can be approximated with a linear function. When this condition is satisfied, the calculations can be simplified.