Purchase Solution

Mapping of poles/zeros in s and z planes, discrete time sig

Not what you're looking for?

Ask Custom Question

Mapping of poles/zeros in s and z planes for given discrete time signals

Attachments
Purchase this Solution
Solution Summary

Mapping of poles/zeros in s and z planes for given discrete time signals

Solution Preview

Mapping of poles/zeros in s and z planes for given discrete time signals

9.1
(a)

Representative mapping in the z plane is derived from the s plane
using (1) and (2) for magnitude and phase respectively

(1) Magnitude in z plane from s plane (real part )

(2) Phase in z plane from s plane (imaginary part )

Where is the sampling period

So we have

In the s plane two poles

Writing these poles independently we have

Which has a real part in the s plane and an imaginary part in
the s plane

Which maps to magnitude ...

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Mapping of discrete functions in the z and s planes (example

    431482 Mapping of discrete functions in the z and s planes The transform from the s to the z plane using the transform z = e^sT(s) is used to obtain an inverse transform in terms of s , namely s = Ln(z)/T(s) This is then used to find the s

  • Analysis of z transform to time domain, poles and zeros

    + z^-9 Finally the third part goes on to show the poles and zeros of X(z) and plot these in the complex z plane as zeros , z(n) = 0.2n*pi, magnitude 1, Poles at 0 From a given z transform X(z) = {1- z^-10}/{1 - z^-1} the discrete time domain form

  • Analysis of discrete time waveforms in z domain

    420738 Analysis of discrete time waveforms in z domain A discrete time domain signal x(n) - u(n) - u(n-10) is decomposed and plotted. It is then examined in the z domian by appropriate transformation and algebraic manipulation.

  • Examing z transform, poles and zeros, time domain signal

    432509 Examing Z Transform, Poles and Zeros We examine the z transform X(z) = (1 - z^-10)/(1 - z^-1) and use properties of the general z transform to find the discrete time signal x(n).

  • Mapping of poles into complex z and s (Laplace) planes

    420042 Mapping of Poles Into Complex Z and W (Laplace) Planes Given poles(in complex notation) are mapped to both the z and s (Laplace) planes.

  • Computation of Z-Transform-Matlab

    b) Use the Z-transform of u[n] and properties of the Z-transform to find X(z). Verify that the expressions obtained above for X(z) are identical. c) Find the poles and the zeros of X(z) and plot them in the z-plane.

  • Using MATLAB to Help Solving Problem on a System

    (la_7.doc) A linear time-invariant discrete-time system has transfer function H (z) = z² - z - 2 ----------- z² - 1.5z - 1 a. Use MATLAB to obtain the poles of the system. Is the system stable? Explain. b.

  • Signal processing using MATLAB

    Hence it proved that both expressions obtained above for x(z) are identical. Find the poles and the zeros of X(z) and plot them in the z-plane. Use MATLAB to plot the poles and zeros.

  • Signal Processing

    If we consider X(z) a polynomial in negative powers of z, what would be its degree and the values of its coefficients? Find the poles and the zeros of X(z) and plot them on the z-plane. Is there a pole or zero at z=1? Explain.

View More Related Solutions