Purchase Solution

Fluid Mechanics for a U-band

Not what you're looking for?

Ask Custom Question

(See attached file for full problem description)

The pipe U-band in the figure attached is connected to a flow system by flexible hoses that transmit no force. The pupse has inner diameter of 3 inches. Water is flowing through the pipe at a rate of 600 gallons/minute. The pressure at point 1 is 5 psig and at point 2 is 3 psig. What is the vertical component of the force in the support? Neglect the weight of the pipe and fluid.

Attachments
Purchase this Solution
Solution Summary

The solution explains how to calculate the vertical force component in a U-band using fluid mechanics principles.

Solution Preview

A). The force exerted by the sail on the air is:

10 m/s * 200 kg/s = ...

Purchase this Solution
Free BrainMass Quizzes
Introduction to Nanotechnology/Nanomaterials

This quiz is for any area of science. Test yourself to see what knowledge of nanotechnology you have. This content will also make you familiar with basic concepts of nanotechnology.

Basic Physics

This quiz will test your knowledge about basic Physics.

Classical Mechanics

This quiz is designed to test and improve your knowledge on Classical Mechanics.

Variables in Science Experiments

How well do you understand variables? Test your knowledge of independent (manipulated), dependent (responding), and controlled variables with this 10 question quiz.

The Moon

Test your knowledge of moon phases and movement.

View More Free Quizzes
Related BrainMass Solutions

  • Fluid mechanics :sample question

    4096 Fluid mechanics :sample question Consider the steady flow of a Casson Fluid through a rigid circular pipe of radius R, driven by a pressure gradient . What equation and Boundary conditions govern this motion?

  • You have a liquid sitting between 2 plates. A shear stress

    125570 Simple Fluid Mechanics: Liquid between two plates You have a liquid sitting between 2 plates. A shear stress is applied to the top plate causing it to move.

  • Water flowing, circular pipe, diameter

    Assume: The fluid is incompressible and non-viscous. Shown below is a cross-section of vertical view of a pipe discharging a fluid into the atmosphere at its highest elevation. The pipe diameter increases and then remains constant.

  • Fluid Mechanics problem

    Thanks for using Brainmass.com The solution contains a detailed explanation to solve the fluid mechanics problem.

  • Better Formula for Fluid Mechanics Problem

    Hello, I have attached my hand calculations for the open channel velocity using both Chezy and Kutter's formulas. Thanks for using BrainMass! This solution helps with a fluid mechanics problem.

  • Dimensional Analysis and Dynamic Similtude

    The drag force on a small sphere in laminar motion is given by 3(pi)(mu)DU. This problem is in Fluid Mechanics by Victor Streeter. This boils down to our most favorite of Newton's Laws. Force equals mass times acceleration (F=ma).

  • Calculating Fluid Mechanics

    46026 Calculating Fluid Mechanics 1) The bed of a canal falls 2.63ft. vertically in a horizontal distance equal to 2150 ft. The rate of slope of the hydraulic grade line for the canal is?

  • Fluid Mechanics: U Tubes

    32969 Fluid Mechanics: U Tubes A U tube open at both ends is partially filled with water. Oil having a density of 750 kg/cubic meter is then poured into the right arm and forms a column L = 5.00 cm high.

  • Fluid Mechanics, Moment of Inertia

    This solution helps with a problem regarding fluid mechanics.

View More Related Solutions